top of page

ENGINEERING INSIGHTS | Where did Sydney's sewage go before treatment plants?

Writer: Rebeka Zubac
Rebeka Zubac
6 days ago
2 min read

By the 1870s, Sydney Harbour was grossly polluted. Since 1859 the city's sewage had drained through five outfall sewers straight into it, and the harbour was carrying the waste of a fast growing town.

Taking the sewage out of the harbour

The answer was to stop the sewage reaching the harbour at all. Between 1880 and 1889 the Public Works Department built the Bondi Ocean Outfall Sewer, also known as the Main Northern Ocean Outfall Sewer. It is an intercepting sewer: it collects flows from the older city sewers and carries them east, away from the harbour.

It runs about 6.1 kilometres from the corner of Oxford and College Streets in Darlinghurst to Ben Buckler at North Bondi, where it discharged at the cliff face into the ocean. Branches reached the city, Darlington, Newtown, Annandale, Leichhardt, Glebe and Balmain, with large sewers from East Sydney, Paddington, Woollahra and Waverley joining along the way.

Why an egg shape

Slide showing 2.4 by 2.2 metres: the egg shaped cross section of the Bondi Ocean Outfall Sewer at the outfall end

The sewer is lined in brick with an oviform, or egg shaped, cross section, measuring 2.4 metres by 2.2 metres at the outfall and narrowing to 2.1 metres by 1.8 metres at the main junction. The narrow base matters. When flows are low, it keeps the water deep and moving fast enough to carry solids along instead of leaving them to settle.

The survey work was so accurate that bricklayers started lining the tunnel before the two ends had even broken through.

The limits of gravity

The whole system ran on gravity, rising gradually as it extended inland. That meant it could only serve land above it. Lower areas later needed pumping stations to lift their sewage up into the system.

The sewage was discharged untreated until the Bondi treatment plant began partial operation in 1953. Bondi's 2.2 kilometre deepwater ocean outfall was commissioned in 1991, part of the program that moved Sydney's main discharges well offshore.

Still working

The Bondi Ocean Outfall Sewer is listed on the NSW State Heritage Register as the first ocean outfall sewer of its type designed and built in Australia, and is recorded as substantially intact. It still carries flows to the Bondi plant, which Sydney Water says was originally designed for 250,000 people and now serves the equivalent of more than 780,000.

What it means today

For hydraulic and civil engineers the questions are the same ones the 1880s engineers faced. Where does it fall? What can gravity reach, and where will we need to pump? And what happens when the catchment grows well beyond what the original brief described?

Gravity does the work for free, but only for what sits above the pipe.

Cover photo: Bondi Sewer Vent, J Bar, Wikimedia Commons, CC BY-SA 3.0.

Sources

FEATURED ARTICLE

LATEST ARTICLES

NEVER MISS A NEW POST

  • LinkedIn
  • Instagram
bottom of page