top of page

WHAT'S CHANGING | NSW pushes back key building reform dates

Writer: Rebeka Zubac
Rebeka Zubac
4 days ago
2 min read

Building Commission NSW has confirmed new dates for several building regulation reforms that affect design and building practitioners.

The extension of the Design and Building Practitioners Act to repair, alteration and renovation work on existing Class 3 and Class 9c buildings will now commence on 1 July 2028, two years later than planned. Repair, alteration and renovation work on existing Class 2 buildings, and mixed use buildings with a Class 2 part, is still covered. New Class 3 and 9c buildings have been covered since July 2023. Registered building practitioners now have until 30 June 2027 before they must hold adequate professional indemnity insurance. The increase in the strata building bond from 2 to 3 per cent has also been deferred to 1 July 2028. The deferrals do not apply to the statutory duty of care, which continues to apply to construction work on all building classes.

Three NSW building reform dates moved: DBP Act Class 3 and 9c 1 July 2028, builder PI insurance 30 June 2027, strata bond to 3% 1 July 2028
What stays the same under the NSW reform deferrals

Separately, the Building (Approvals and Practitioners) Act 2026 passed Parliament on 4 August 2026. It will start on a date set by proclamation, once the supporting regulations are in place. Among other things, building approvals will move out of the Environmental Planning and Assessment Act 1979 and into the new Act.

The new Building (Approvals and Practitioners) Act

For building services, the dates matter most on remedial and upgrade work in existing Class 3 and 9c buildings, which include aged care. When the extension starts, that work will come under the same regulated design framework that already applies to Class 2 remedial work, where a registered design practitioner prepares the design and design compliance declarations are lodged on the NSW Planning Portal.

What to do now: if you have remedial or upgrade work planned for Class 3 or 9c buildings across 2027 and 2028, keep the 1 July 2028 date in mind when setting the programme, and watch for the regulations under the new Act.

Sources: Building Commission NSW, McCullough Robertson, Australian Constructors Association

FEATURED ARTICLE

LATEST ARTICLES

NEVER MISS A NEW POST

  • LinkedIn
  • Instagram
bottom of page